Products

Commercial exteriors

Surface Preparation

  • All loose material and contaminants must be removed.
    Clean substrates using a water blaster or soft broom and hose to remove accumulated airborne contaminants, poorly adhering paint and loose substrate particles.

  • Make good surface damage or imperfections.
    Fill all cracks and nail holes with appropriate filling compound.

  • Previously Painted Enamel and Polyurethane -
    Lightly sand to remove gloss and clean with a lint free cloth.

Prep Coat

  • Timber Weatherboards, Barges and Facia -
    Prime bare areas with Quick Prep.

  • Galvanised Iron Cladding, ColourSteel, Galvanised Roller Doors and Zincalume -
    Treat corroded areas with a premium zinc-based rust remover, prime bare areas with GalvCoat.

  • Cementious Cladding, Concrete Block Concrete, Stucco and Solid Plaster -
    Prime bare areas with Masonry Sealer.

  • PVC Spouting and Downpipes -
    Prime bare areas with Quick Prep.

Top Coat

  • Timber Weatherboards, Barges and Facia -
    Apply two coats of HiGuard.

  • Cementious Cladding, Concrete Block and Concrete -
    Apply two coats of HiGuard.

  • Stucco and Solid Plaster -
    Apply two coats of HiBuild 200.

  • Galvanised Iron Cladding, ColourSteel, Galvanised Roller Doors and Zincalume -
    Apply two coats of HiGuard.

  • Timber Doors and Windows -
    Apply two coats of ArmourGuard.

  • PVC Spouting and Downpipes -
    Apply two coats of HiGuard.

partners we work with:

Product specifications change from time to time and may differ from those published on this website.
If you have any questions please contact us directly at the address below.

Copyright © 2014 Paint Plus Colour Systems Ltd.
Address: 50 Diana Drive, Glenfield, Auckland, New Zealand
Phone: +64(9) 912 8474  |  Email: Contact us